NRM-6900

Product Description
Features
Model
Specification
Q&A

Product Description

Wireless Video Monitoring System

Even in places where there is no Wi-Fi environment, you can check the situation with video and audio. Achieved a wireless reach of about 100m.
*When a receiver leaves outside of the wireless signal reaching range, the receiver displays a message and starts an alarm sound.

Features

Sound & Video monitor

See the care recipient and can talk to her.

It is a 2-way wireless

It is possible to listen to the call from the user and talk from here.

External Sensors

Various detection sensors can be connected to this system wirelessly.

Camera direction change

You can control the orientation of the camera from the monitor side.

Model

Transmitter/IP Camera+Receiver/Monitor

Product Number

NRM-6900

Call Button Set

NRM-6900＋Call button

Product Number

SNRM6900-C

Detection Sensor Options

Infrared Sensor

When a care recipient opens the door, the sensor is activated.

Floor Sensor

When a care recipient steps on the sensor, it is activated.

Bed Sensor

When a care recipient gets up, the sensor is activated.

Specification

Name of Product	Receiver	Transmitter
Product Number	NRM-6900RX	NRM-6900TX
Dimensions（mm）	125ｘ90ｘ23	98ｘ89ｘ85
Weight（g）	155	205
Materials	Housing：ABS	Housing：ABS
Power	AC Adapter（DC5V/1A） /Lithium ion polymer rechargeable battery	AC Adapter（DC5V/1A） / Lithium ion polymer rechargeable battery

Q&A

"No signal" is displayed on the screen and the alarm does not stop. What is it?

If the monitor cannot confirm communication with the camera, “no signal” will be displayed on the screen and the alarm will continue to sound.
If the camera is not turned on, the display and alarm will disappear when the power is turned on.
Also, if the monitor and camera are too far apart, the display disappears when the distance is reduced.

Is it possible to add more transmitters and receivers?

It cannot be expanded. Please use it in a one-to-one configuration.

How can I change the volume of the alarm?

Press the menu button to display the menu on the screen, adjust the volume mark with the left and right of the operation button, and change the volume with the up and down of the operation button.

"Please replace sensor batteries" is displayed and the alarm does not stop. What is it?

When the sensor is operated and the alarm sounds from the monitor, if the battery of the transmitter for the cordless sensor is exhausted, “Please replace sensor batteries” will be displayed on the screen and the sound will continue to sound at regular intervals. When the display appears, replace the battery of the transmitter for the cordless sensor.
To turn off the display and sound of the monitor, it is necessary to operate the sensor again after replacing the battery.

Products List